Yicaiyang International Co. Ltd
Establish long-term cooperative relationship is development needs!
Add to Cart
armor wrap pipe repair
Fast curing, easy to operate
Outside cable joint
Pipeline the leak repair quickly
Specifications: 2 in* 10 ft (5.1 cm x 3.0 m) 4 in*15ft (10.2 cm x 4.6 m) For other size we can as your requriement to do.
Look forward to cooperate with you!
More detail
Description:
Pipe repair bandage is a fast curing tape composed of flexible fiberglass mesh impregnated with water activated polyurethane resin. Our repair bandage uses environmental friendly materials, mainly used for Repair Oil , Gas,Water Pipeline etc,and adheres to Metal, plaster, PVC, Copper, Rubber, Fiberglass, Concrete, Wood, Ceramic, Polyester, etc.
Fiberglass Fix Tape Water Activity Cured Oil Gas Plumbing Pipe Fast Repair Reinforce Armored Bandage /Leak Repair Kit
Specification:
| Name | Model | Size | Packing |
| Pipe Repair Bandage | PR002 | 50mm x 3.6m (2" x 12´) | 10rolls x 10rolls/ctn |
| PR003 | 75mm x 3.6m (3" x 12´) | 10rolls x 10rolls/ctn | |
| PR004 | 100mm x 3.6m (4" x 12´) | 10rolls x 10rolls/ctn | |
| PR005 | 125mm x 3.6m (5" x 12´) | 10rolls x 10rolls/ctn | |
| PR006 | 150mm x 3.6m (6" x 12´) | 10rolls x 10rolls/ctn |
Package: OEM is available
| Outstanding Advantages | Technical Data |
| v Catalyst: Water v Resin Makeup: Polyurethane v Heat Resistance: 180°C v Pressure: 450 PSI v Bonds: Copper pipe, PVC, polypipe, metal, fibreglass v Set Time: 20 – 30 minutes, sets under water v Chemical resistance: Most diluted chemicals and fuels | ♦ Useable life: …2-3 minutes, depending on temperature of water and pipework ♦ Intial cure time: … 5 minutes ♦ Full cure time: … 30minutes ♦ Shore D hardness: … 70 ♦ Tensile strength: … 30-35Mpa ♦ Tensile modulus: … 7.5Gpa ♦ Maximum service temperature: … 180°C ♦ Pressure resistance: … 450psi (Min wrapping 12 layers around cracked/leaking area) |
Application:
1. Once the leaking area is identified, shut down relevant pipes or hoses immediately.
2. Prepare the surface by cleaning and roughening the pipe.
3. Put on enclosed latex gloves.
4. Apply Steel Putty to the leak site and mould.
5. Open foil pouch and immerse bandage in temperate fresh water for 10 seconds.
The entire contents must be used once the package is opened.
6. Apply around the damaged area extending up to 50mm either side of the leak to ensure complete coverage.
It is important that the bandage is applied.
7. As curing begins once it is taken out of the water.
8. Whilst wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together.
Continue this action during and upon completion.
